What should you do if plumber snake is stucked in pipe

WHAT SHOULD YOU DO IF THE CABLE OF PLUMBER SNAKE IS STUCKED IN THE PIPE AND CANNOT BE PULLED OUT?

1. We can reverse the rotation of the plumber snake, the cable will rotate outwards, so that it can be slowly taken out. In the process of rotating the plumber snake in reverse, we can properly rotate the plumber snake forward a few times to adjust the angle of the cable; in the process of taking out the plumber snake, we should not pull the cable too tightly.

2. The use of plumber snake is also very simple, we just need to insert the cable into the drain and shake the handle of the plumber snake with one hand. If the cable of plumber snake does not move forward, you can pull the cable out for a certain distance and then rotate it until the sewer blockage is taken out. For the specific use, you can refer to the product manual.

TO BUY ON AMAZON: https://www.amazon.com/POPULO-Remover-Plumbing-Manually-Bathroom/dp/B09VYYDCJ2/ref=sr_1_11?crid=1R0KPFV0GGGZC&keywords=POPULO+MANUAL&qid=1666939125&qu=eyJxc2MiOiIwLjgwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=populo+manual%2Caps%2C553&sr=8-11

populo